Masterpart DA97-07564A Refrigerator Drawer Rail review

Are you trying to replace a damaged drawer rail in your Samsung fridge and want something that fits right and works smoothly?

Product Overview: Masterpart Refrigerator Salad Vegetable Drawer Rail Left Side To Fit Samsung Fridge Freezers DA97-07564A

You want to restore the smooth operation of your fridge’s salad and vegetable drawer, and this replacement rail is built to match the original. The Masterpart Refrigerator Salad Vegetable Drawer Rail Left Side To Fit Samsung Fridge Freezers DA97-07564A is an original manufacturers replacement part designed to restore function without fuss.

What this part is and why it matters

This is the left-side rail for the salad/vegetable drawer in specific Samsung refrigerator models. If the rail on your fridge is cracked, bent, or worn out, the drawer may stick, not slide evenly, or fall out — and replacing this rail directly addresses that issue. By replacing the rail, you can get your drawer moving smoothly again, protect the drawer mechanism from further damage, and keep produce stored properly.

Compatibility and Fit

You need a part that matches your model to avoid misfits or installation headaches. This rail is listed with manufacturers part number DA97-07564A and is compatible with a large list of Samsung models.

Supported Samsung models

The rail is compatible with many Samsung fridge/freezer models, including variations such as RFG237AABP/XAA and RFG23UERS1/XEU. If your model is on the list, this part is intended to match OEM specifications and mounting points. Double-check your fridge’s model number — usually found on a label inside the fridge — before purchasing to ensure compatibility.

How to confirm compatibility quickly

You can confirm compatibility by locating your fridge’s serial and model label (often inside the main compartment or near the crisper area) and matching it to the list provided by the seller. If you’re unsure, capture a photo of the label and contact the seller or a service technician for verification.

Materials and Build Quality

You want the replacement to feel sturdy and dependable so it doesn’t fail again soon. Masterpart parts are typically manufactured to match the original parts in materials and form, aiming for the same rigidity and resistance to wear.

What the rail is made of

The rail is usually made from durable plastic with reinforcement in key contact areas to resist the pressure of repeated sliding and the weight of a loaded drawer. The finish should be smooth to reduce friction and allow the drawer to glide easily. This material choice balances cost, durability, and compatibility with the fridge’s internal environment (temperature and humidity).

Durability expectations

If you use the drawer normally — not overloading it or forcing it — the rail should last several years. Normal wear can occur if heavy items are repeatedly placed on the drawer or if the drawer is subject to rough handling. Replacing a single rail generally restores original performance when the counterpart rail and drawer components are intact.

Installation Process

You want installation to be straightforward, especially if you plan to do it yourself. Replacing the left-side rail is generally a simple service task that you can complete with basic tools and a little patience.

Tools and time required

Typical tools you’ll need include a Phillips screwdriver, possibly a flat-head screwdriver or plastic trim tool, and a clean cloth. The process can take between 10 and 30 minutes for most DIYers, depending on your familiarity with appliance repairs and ease of access to the mounting area. If screws are seized or internal clips are brittle, it can take longer.

Step-by-step summary

1. Empty and remove the drawer from the fridge.
2. Locate and remove screws or clips holding the old rail in place.
3. Carefully detach the old rail, noting any tabs or alignment features.
4. Align the replacement rail with the mounting holes and tabs.
5. Secure the new rail with screws or clips, ensuring it is level and seated properly.
6. Test the drawer to confirm smooth operation.

Each step is straightforward, and instructions are usually simple and intuitive once you see how the original rail is mounted. If you prefer, you can watch published repair videos for similar Samsung models to visually follow the process.

Performance and User Experience

You’ll want a rail that restores smooth, quiet motion and keeps the drawer aligned. The Masterpart replacement aims to deliver this performance by matching the original design.

How it performs in day-to-day use

Once installed correctly, the drawer should slide in and out smoothly, without wobbling or binding. You should notice the drawer gliding quietly and staying securely in alignment, even when partially loaded with produce or containers. If the drawer still sticks, inspect the opposite rail and the drawer runners for damage or debris.

Noise and friction

A well-installed rail should be virtually silent under normal use. If you notice squeaks or sticky movement, apply a small amount of food-safe lubricant to the contact points or clean out any accumulated debris. Do not use petroleum-based lubricants that could contaminate food or degrade plastic components.

Table: Quick Specs and Features

This table breaks down the core details so you can scan the most relevant information quickly. It’s designed to help you compare specs and decide if this part is the right replacement.

Pros and Cons

You want a clear look at advantages and potential drawbacks so you can make a confident decision. No part is perfect for every situation, and knowing trade-offs helps set expectations.

Pros

• OEM-compatible fit for many Samsung models, so you’re likely to get the right replacement.
• Typically made to the original specification, which helps with durability and fit.
• Restores smooth sliding and alignment quickly, minimizing downtime.
• Affordable compared to replacing the entire drawer assembly.
• Relatively simple DIY installation for most users.

Cons

• Limited to the left side; if the right side is also damaged you’ll need a separate purchase.
• Compatibility depends on exact model variants; some model codes within the same family may differ.
• Material is plastic; although durable, plastic can still break under heavy impact or stress.
• Warranty and return policies vary by seller; you must confirm before buying.

Maintenance and Care

You want the replacement to last, so a bit of preventative maintenance helps prolong its life. Proper care will reduce wear and keep your drawer operating quietly.

Simple care tips

Wipe the rails occasionally to remove dust, dried food, or sticky residues. Use a mild soap solution and a soft cloth to clean the area. Avoid abrasive cleaners that might scratch or wear down the plastic.

Lubrication and handling

If you notice friction, apply a light film of a food-safe silicone lubricant to the sliding surfaces. Don’t use cooking oil or petroleum jelly, as those can attract dust and degrade the plastic over time. Also, avoid overloading the drawer; distribute weight evenly to minimize strain on the rails.

Troubleshooting Common Issues

If you encounter problems after installing the new rail, you’ll want straightforward ways to diagnose and fix them. Many issues are simple to correct once you know what to check.

Drawer still sticks or binds

Check the opposite rail and the drawer slide bearings for damage or debris. Ensure the replacement rail is fully seated and screwed in tight but not overtightened. Sometimes slight misalignment causes binding; loosen fasteners, realign, and retest.

Drawer wobbles or drops

Confirm that both rails are the correct parts and are installed at the same height. Examine mounting tabs for cracks or missing clips. If the drawer bottom or sides are deformed, the rail alone might not resolve the problem.

Excess noise

If the drawer squeaks, clean the track and apply a small amount of food-safe silicone lubricant. Ensure screws are not loose and there’s no excessive movement in adjacent parts.

Comparing with Alternatives

You want to choose the best option for your repair — sometimes OEM-compatible parts are the right call, other times universal parts or professional repair may be better. Here’s how this Masterpart compares.

OEM-compatible vs generic

OEM-compatible parts like this Masterpart rail usually offer a better fit and match to original mounting points than cheap generics. Generic rails can be less precise and may require modification. If you prefer plug-and-play replacements, choose OEM-compatible options.

Buying a full drawer assembly vs single rail

Replacing a single rail is cost-effective when only the rail is damaged. If the drawer itself, other rail, or internal guides are also worn or cracked, a full drawer assembly may be worth the extra cost to ensure long-term reliability.

Professional repair vs DIY

If you’re comfortable with basic tools and following simple steps, DIY replacement is straightforward and saves money. If you’re unsure or your fridge has additional issues (electrical or complex cabinetry), hiring a professional may be safest.

Price and Value

You want value for money, not just a low sticker price. This replacement rail typically offers a good balance of affordability and fit, especially compared to replacing larger assemblies or buying a new fridge.

Cost considerations

The part itself is usually inexpensive relative to the cost of major fridge repairs. Factor in any tools you don’t already own and potential shipping costs. If you do the repair yourself, you’ll save on labor fees, making this a budget-friendly solution.

Long-term value

A properly installed replacement rail can extend the usable life of your refrigerator’s drawer for years, making the purchase a cost-effective maintenance action. Regular care will further increase the long-term value.

Where to Buy and What to Look For

You want to buy from a reputable source and check return policies in case the part doesn’t fit. Certain online sellers specialize in appliance parts and often include compatibility checks in their listings.

Recommended purchase channels

Check authorized appliance parts retailers, specialized online marketplaces, and Masterpart distributors. Pay attention to seller ratings, return policies, and warranty terms. Some retailers offer free returns or matching tools that confirm part compatibility with your fridge model.

What to verify before buying

• Confirm the exact model number of your fridge and compare it with the compatibility list.
• Confirm that you’re ordering the left-side rail and not the right-side or another variant.
• Check the seller’s return policy and any warranty offered on the part.
• Look for product images and part numbers in the listing to ensure it matches the OEM part.

Warranty and Returns

You want to know you’re protected if the part is faulty or doesn’t fit. Warranty and return policies vary, so check the specific listing.

Typical coverage

Some sellers provide limited warranties for manufacturer defects or offer a refund/exchange period. Coverage lengths differ, and some distributors have more generous terms than third-party marketplaces. Keep your purchase receipt and document the part number in case you need to return or claim warranty.

What to do if the part fails early

If you receive a defective or incorrect part, contact the seller immediately with your order details and photos. Most reputable sellers will offer a replacement or refund. If a problem occurs after installation, check for installation errors first, then escalate to the seller or Masterpart representative if the issue appears to be a manufacturing defect.

Safety and Disposal

You want to stay safe during installation and dispose of the old part responsibly. Handling small screws and plastic parts requires attention.

Safe installation practices

Turn off any nearby lights or appliances that might cause distractions, and keep your work area dry and well-lit. Use appropriate tools and avoid forcing parts; if something doesn’t align, double-check the orientation and mounting points. Keep sharp tools and small screws away from children.

Disposing of the old rail

Plastic parts can often be recycled depending on local regulations. If the rail is cracked beyond use, dispose of it in your general recycling if accepted, or follow local waste guidance. If the part has metal screws or clips, separate them for proper recycling where possible.

FAQs

You want quick answers to common questions so you can decide faster. These are the questions people ask most often when considering this replacement rail.

Will this rail fit my Samsung model?

If your model is on the compatibility list and your fridge uses the same mating features for the left-side drawer rail, it should fit. Always confirm the model number on your fridge and compare it to the seller’s compatibility list before purchasing.

Can you install it yourself?

Yes, you can usually install it yourself with basic tools like a Phillips screwdriver and a little patience. If you’re unsure, check a model-specific repair video or get help from a friend.

What if the drawer still doesn’t operate smoothly after installation?

Check the opposite rail, drawer runner, and for any debris or deformation of the drawer itself. Slight misalignment during installation is a common cause, so loosening and re-seating the rail can often fix it.

Is lubrication safe to use on fridge rails?

Use a food-safe silicone lubricant if lubrication is necessary. Avoid petroleum-based products, as they can attract dirt and damage plastic.

Final Thoughts and Buying Advice

You want to feel confident that buying this part solves the problem without surprises. This Masterpart rail provides a practical, cost-effective solution for restoring the drawer function on compatible Samsung refrigerators.

When to buy this part

Buy this part when the left-side rail is cracked, worn, or bent, and when the drawer is not functioning properly on that side. If the opposite rail or drawer is also damaged, consider replacing both rails or the entire drawer assembly for best long-term results.

Final recommendation

If your fridge model is listed and you prefer a direct-fit, OEM-compatible replacement, the Masterpart Refrigerator Salad Vegetable Drawer Rail Left Side To Fit Samsung Fridge Freezers DA97-07564A is a solid choice. It balances affordability and fit, and with correct installation, it should restore smooth, reliable drawer operation.

If you’d like, you can tell me your fridge model number and any symptoms the drawer is showing, and I can help confirm compatibility or walk you through the installation steps.

Disclosure: As an Amazon Associate, I earn from qualifying purchases.